How To Repair An Inflatable Boat
by
Kristy Annely ARTICLE REPRINTING IS PERMITTED
The owner can attempt small inflatable boat repair if factory-gluing instructions are followed closely. Rips and holes larger than one inch in the air chambers, or those within two inches of a seam, should be repaired with internal and external patches by a professional repair technician at a certified repair facility. A quick patch repair by the user may solve the problem for a short period of time, but it is recommended to have it redone by a professional.
It is also recommended that major inflatable boat repair, and the addition of large accessories such as oar locks, seating or towing rings, be done by a professional repair technician at a certified repair facility.
If the boat is still under warranty, and the user is experiencing a seam failure, or the wooden transom is separating from the molded transom flanges or tube set, or the fabric is turning yellow and sticky, it is recommended that the dealer be contacted immediately. Defective seams or sticky fabric may result in complete warranty coverage, and the user may receive a new boat free, or at a small-prorated fee.
Hypalon® is a brand name of DuPont. Its technical name is chlorosulfonated polyethylene, but the user may know it simply as synthetic rubber. It is one of the most popular types of materials used in inflatable boat manufacture. Hypalon® is more expensive than PVC, but lasts longer, being more resilient to UV damage, abrasions, gas and oil. It has an average life of 20-30 years. Hypalon® inflatable boats can be repaired and restored with adhesive.
Hypalon® adhesive is a product that performs inflatable boat repairs and restores the boat to its original condition. The adhesive has two parts, the Basecoat and the Topcoat, which are easily applied by simply painting it on, after properly cleaning with a primer like Methyl Ethyl Ketone (MEK). The adhesive comes in a variety of colors to suit the color of the boat.
Information About The Author
Inflatable Boats Info provides detailed information on pontoon, rigid and fishing inflatable boats, as well as trailers, repairs, used inflatable boats and manufacturers. Inflatable Boats Info is the sister site of
River Rafting Web.
Published by
Meta Search Engine LOOK-4IT.COM.
You can reprint this article for FREE at your web site. Doing this you agree to keep all texts and hyperlinks unchanged. Please keep
reference to LOOK-4IT.COM meta search engine as well, if you decide to use this article as a
free content for your web site.
Back to article category:
Inflatable Boats Additional Inflatable Boats Articles
A Review of Inflatable Boat Manufacturers There are many manufacturers of inflatable boats on the market today. Included below is an overview of each of the key manufacturers.
Should You Buy a Used Inflatable Boat? There are two types of used inflatable boats for sale - those that have never been patched before, and those that have been repaired. Repaired boats are worked upon by factory technicians using the same glue and same techniques used for a new boat, and hence are as good as new ones.
Rigid Inflatable Boats A rigid inflatable boat is defined as a hard-hulled boat with air inflatable collars. RIB hulls are made of fiberglass, aluminum or composite materials. The soft bumpers or fenders, called "sponsons," can be air tubes, or all foam systems.
Inflatable Pontoon Boats Bryce Whitmore designed the modern whitewater inflatable pontoon boat, and in fact designed several models. The one that has been produced the most is a three-tube model of unparalleled maneuverability and load bearing capacity. This boat which is fourteen feet overall, can carry 6 passengers, their baggage, and a guide.
The Benefits of Inflatable Fishing Boats Inflatable fishing boats are great yacht tenders/camping boats that are light enough to be carried in a backpack. Some 8-foot inflatable fishing boats are good for two and gear, and are large enough to float in moderate whitewater rivers.
